MECH 289 Design Graphics (Revised 10-04-12, 14H55)

• MECH 289 Design Graphics Schedule 2010

• MECH 289 Introduction to Modules M2 and M3 10-01-26

• MECH289 Mid-Term Tests '10, '08, '07, '06

• MECH 289 Geometric Construction Problem 1:- Maxwell's Diagram, Assigned 10-01-26

• MECH 289 CAD1:- Posted 10-02-03

• MECH 289 Geometric Construction Problem 1:-Solution 10-02-12

• MECH 289 Geometric Construction Problem 2:- Assigned 10-02-09

• MECH 289 Geometric Construction Problem 2: Solution 10-02-27

• MECH 289 Fundamentals of Geometric Construction*

• MECH 289 Elementary Descriptive Geometry and Equivalent Linear Algebra*

• MECH 289 Project Photos 10-01-05*

• MECH 289 CAD2 Assignment:- <http://cim.mcgill.ca/~paul/CAD2amir02j.zip> download and save 10-02-10

• MECH 289 CAD2 Information:- <http://cim.mcgill.ca/~paul/CAD2-Door-Bifold.zip> download and save 10-02-17

• MECH 289 CAD3 Assignment:- <http://cim.mcgill.ca/~paul/CAD3 assignment.zip> download and save 10-02-17

• MECH 289 CAD4 Drawing Layout Instructions 10-03-03

• MECH 289 CAD4 Drawing Assignment 10-03-04

• MECH 289 CAD Formatting Instructions:- <http://cim.mcgill.ca/~paul/TEMPLATE.zip> download and save 10-03-09

• MECH 289 Hollow Structural Shapes 10-03-11

• MECH 289 I,WF,U,L Structural Shapes 10-03-11

• MECH 289 CAD5 Drawing Assignment 10-03-11

• MECH 289 Structural Steel Website (Click on "American Example" at  <http://www.webcivil.com/default.aspx>) 10-03-15

• MECH 289 CAD6 Drawing Assignment 10-03-30

• MECH 289 Final Project Layout & Detail 10-04-01

• MECH 289 Structural Steel Shapes; Inches 10-04-12

• MECH 289 Steel Bars, Plates, etc. 10-04-12

• Ignore  items below this line.

• MECH 289 Design Graphics Project '08 (update 08-03-20)

• MECH 289 Nabil Shalabi's PPT Lecture 08-01-28

• MECH 289 Nabil Shalabi's PPT Lecture 08-02-01

•  

•  

• MECH 289 Geometric Construction Problem 2:- Oriented Single Axis Isometric Rotation, Assigned 07-02-09

• MECH 289 Point View of Cube Body Diagonal; Maple Worksheet

• MECH 289 Coordinates of Two Unit Axes for Oriented Isometric Single Axis Rotation (GCA2)

• MECH 289 Solution to GCA2; Maple with Constructive Check

• MECH 289 Geometric Construction Problem 1:- Molding Miter, Assigned 06-01-23, Due 06-01-30

• MECH 289 Geometric Construction Problem 2:- A Connection, Assigned 06-02-10, Due 06-02-17

• MECH 289 CAD Problem 1:- A Bracket, Assigned 06-01-27, Due 06-02-03

• MECH 289 CAD Problem 2:- Details, Assigned 06-02-03, Due 06-02-10

• MECH 289 CAD Problem 3:- Revisions, Assigned 06-03-01, Due 06-03-13

• MECH 289 CAD Problem 3:- Zipped Solid Works Folder

• MECH 289 CAD Problem 4:- Assigned 06-03-15, Due 06-03-20

• MECH 289 CAD Problem 5:- Assigned 06-03-20, Due 06-03-27

• MECH 289 CAD Problem 6:- Assigned 06-03-27, Due 06-04-03

• MECH 289 CAD Problem 7:- Assigned 06-04-03, Due 06-04-10

• MECH 289 Constrained Fitting of a Rectangular Strut between Planes

• MECH 289 Design Graphics Project '06

• MECH 289 Design Graphics Solid Modelling Exercise

• MECH 289 Ball Bearing Catalog

• MECH 289 Bevel Gear Catalog

• MECH 289 Cap Screw Catalog

• MECH 289 External Snap Ring Catalog

• MECH 289 Internal Snap Ring Catalog

• MECH 289 "Deliverables"; A Schedule for Your Final Design Graphics Project